Nr.8180 --een prachtige 16mm SIEMENS 2000 projector met transistor versterker, heeft optisch geluid en een 800 watt losse halogeen lamp, geschikt voor 600 meter spoelen, heeft service beurt gehad en is in goede staat

Vorige Artikel 26 van 26
€ 295,00



An Ampere-meter is used to control the lamp circuit current which depends on the type of lamp used Either a 250volts 500,750 or 1000 watt lamps can be used.
REEL CAPICITY = 650m (2,200 feet). Can be extended to 4,000ft with extension arms not supplied.
THREADING = Manuel (less chance of film damage).
RUNNING SPEED = 16/18/20/24 Frames per second with additional +/- 5%.
POWER INPUT = 110/125/150/220/240V 40 to 60 Hz.
SHUTTER SPEED = 2 or 3 Blades.
AMPERE-METER = Used for monitoring light voltage.
LAMP SETTING = By turning the master switch further clockwise the screen brilliance can be increased.
LAMP ADJUSTMENT = Possible by turning the lamp adjustment control knobs to get a maximum light output.
PROJECTOR LAMP = 500/750/1000 W. halogeen lamp
EXCITER LAMP = BRK, 4V-0.75A.
SOUND = Can play back 16mm films with  Optical sound track.
PILOT LAMP = To be used in low light conditions to help threading or checking film movement whilst being projected.
SCANNING ADJUSTMENT = Alignment adjustment can be made at any time on Optical prints where the sound track is not printed in the correct position by just using a coin.
LENS = Standard Astro - Kino - Color V 1:1,5 50mm plus additional lens 1:1,8 25mm lens.

AMPLIFIER = 15watts RMS output, transistor
ELEVATION = Fast acting tilt control knob.

REWIND = High speed rewind if required by pressing the clutch lever on the take up spindle.
LUBRICATION = As the projector is self lubricating it is unnecessary to oil any part of it.
MADE IN GERMANY BERLIN - MUNCHEN (This is a genuine Siemens product)
 

© 2015 - 2021 filmwebshop | sitemap | rss | webwinkel beginnen - powered by Mijnwebwinkel